InterCom
The InterCom function enables an audio connection to be established to a phone without someone having to actively take a call (for example, in a medical practice). Communications takes place bi-directionally so that a person who is close by can use the intercom created to talk to the caller.
Requirement for use
•PBX firmware from Version 8.2 with activation for D-series convenience package
•For the InterCom destination:
−InterCom permission granted in the PBX
−Activated function: Automatic call acceptance > On SIP request
−Optional: Beep when connecting, Interrupt active calls
•For the InterCom source:
−Configured speed dialling key with InterCom parameter activated
Configuration (InterCom destination)
Web interface:
•Telephony > Call settings > Automatic call acceptance
Phone:
•Settings > Telephony > Automatic call acceptance
Provisioning:
Configuration (InterCom source)
Web interface:
•Function keys > new function key > Speed dial
Phone:
•Settings > Function keys > new function key > Speed dial
Provisioning:
Process
1.Press a speed dialling key configured for InterCom.
The function key's LED flashes red. If a call connection has been made, the LED starts shining red.
2.If the Beep when connecting setting is activated, a short signal tone is output at the InterCom destination.
3.A bi-directional connection is then present between the InterCom source and InterCom destination without a call being actively taken.