Options for Experts
Fallback for
No fallback is possible for the current identity.
Sets the main identity for which the fallback identity applies.
Configured identity: Display Display name
Unconfigured identity: Displays the identity + seq. no.
Notes: In the case of a main identity, the field is greyed out and displays the entered fallback identity. A fallback identity can also be created for identities that have not yet been configured.
CLIR type
(Number presentation suppression)
Area in the From header in which the VoIP provider expects to receive number presentation suppression. Selection as set in the PBX/at the provider.
No display text
A blank display text is sent in the From header.
Anonymous
The sent display text in the From header is "anonymous".
User anonymous
Both the display text and the User name section in the From header contain "anonymous".
Voicemail number
Enter the voicemail number assigned by the VoIP provider or the voicemail number entered in the PBX.
Pick-up code
This is required to perform a call pick-up. Character string stored on the PBX/at the provider, e.g. ##06 for Auerswald PBXs.
Music on hold
If a connection or call is on hold, the "music on hold" is played.
Framesize
Sets the RTP packet size (msec Audio/RTP package).
Jitter buffer size
Specifies how many RTP packets can be cached to buffer or compensate for disruptions. (40 … 160 msec)
IP version
IPv4
Sets IPv4 for the registrar.
IPv6
Sets IPv6 for the registrar.
Auto
Automatically sets the protocol used by the registrar.
Interface type
The device can be accessed using the network or via VPN. Devices in one network cannot access devices in the other network. The Interface type sets the network in which the system is to look for devices, for the identity.
Network
Sets the network as the interface.
VPN
Sets VPN as the interface type.
SRTP
Transport protocol for encrypted connections.
Mandatory
This setting forces voice encryption to be on. If the voice partner (VoIP provider, PBX, external VoIP subscriber) does not support SRTP, the connection is not established.
Preferred
Switches on negotiation for the encryption of call data via SRTP. When a call is made, the call partner will be asked if encryption is possible. If selected, voice data is transmitted in encrypted form. If not selected, it is not encrypted.
Disabled
This setting forces voice encryption to be off. If the voice partner (VoIP provider, PBX, external VoIP subscriber) does not support encryption, the connection is not established.
For more information, see
SRTP.
SIPS
Activates the transmission of encrypted SIP messages over TLS for connections with this identity.
The destination in the invite package header is contacted with an encrypted transmission.
Note: To create a successful, secure connection, a certificate must be provided for the provided host, if necessary.
Peer-to-peer TLS
Forces the encryption of SIP messages over the entire route to the destination.
Note: The call is not made if TLS is not available on the entire connection.
Check hostname
Checks whether the certificate belongs to the domain/IP.
Certificate
If the SIPS function is activated, the system checks whether the certificate belongs to the domain/IP.
Session timer
Switches on the check after a connection for a call that is still in existence.
Note: When the SIP session timer is switched on, this may result in the call being interrupted more frequently after the specified interval, if a VoIP provider has not implemented session renewal properly. In this case, set a different session timeout or disabled the session timer.
For more information, see
SIP.
Session timeout (in min.)
2 … 255 minutes, default: 15 minutes
Specifies the number of minutes after which the SIP session timer is to check a call's connection.
For more information, see
SIP.
Protocol type
UDP
(the User Datagram Protocol) is used to send data packets over connectionless non-secure communication lines.
TCP
(Transmission Control Protocol) segments data into packets from a specified size and sends these individual data packets to the recipient address until receipt has been confirmed.
For more information, see
SIP.
Important: If encryption is enabled by SIPS, the TCP transport protocol is used. Manual settings are overwritten.
Local SIP port
0 … 65535
Sets the outgoing port for SIP messages.
Note: Enter "0" to generate a random port.
Important: If you define more than one identity, the SIP port for each identity must be different. If you enter "0", different ports are assigned automatically.
For more information, see
SIP.